piccolo trolley assembly

​Assembling instructions for the Piccolo trolley

1. Turn the top shelf upside down and put it on the floor on a soft flat surface (such as the carton from the packaging). Then insert the 4 legs in the corners, and fix them with 2 hex socket screws and 2 washers for each leg. Don’t tighten them yet, leave them a little loose so the legs can still move for now.

2. Now turn the trolley on its side, and attach the middle shelf to the assembled stand as in the image, using 2 hex socket screws and 2 washers for each corner. Use the 8 larger washers for this shelf. If you can't manage to fit the shelf, just unscrew the bolts of the legs a little bit further so they can move.
​

​3. At last attach the bottom shelf to the assembled stand as in the image, using 2 hex socket screws and 2 washers for each corner.

4. Now turn the trolley upside down again, and attach the 4 castor wheels to the legs. Make sure they are tightened well.

​Tighten all bolts on the top, middle and bottom shelf.



​5. Turn the trolley around on its wheels, it is now ready to put your Piccolo oven on it.